Today i tray to repair dead nokia c1-01 RM-607 after water damaged.
1. open the cover baterei and put out the batere.
2. open the back case by open 2 screw.
3. wash the board of c1-01 with thinner to clean the water.
4. Dry the board with the blower.
5. Test the board with baterei,
6. Next hold the power button, the set show nokia logo, but I'm no lucky, after nokia logo the lcd
only show local mode.
uf...because very sleepy, I stop to repair the set. and hope tomorrow can finish to repair the set.
see you next time.
Update :
Try with other baterei, the set working normal.
ok. the reality is the baterei error after water damaged .
Good luck
1. open the cover baterei and put out the batere.
2. open the back case by open 2 screw.
3. wash the board of c1-01 with thinner to clean the water.
4. Dry the board with the blower.
5. Test the board with baterei,
6. Next hold the power button, the set show nokia logo, but I'm no lucky, after nokia logo the lcd
only show local mode.
uf...because very sleepy, I stop to repair the set. and hope tomorrow can finish to repair the set.
see you next time.
Update :
Try with other baterei, the set working normal.
ok. the reality is the baterei error after water damaged .
Good luck
No comments:
Post a Comment